Visit ATTO in Barcelona At NetApp Insight 2018

ATTO will highlight the ATTO XstreamCORE™ family of Fibre Channel storage controllers at NetApp Insight Barcelona December 3-5, Fira Barcelona Gran Via. As a key part of the NetApp® MetroCluster™ solution, ATTO storage controllers provide low latency site-to-site connectivity, disaster recovery and downtime avoidance.

Our next-generation NetApp solutions include ATTO Celerity Fibre Channel HBAs and XstreamCORE FC 7600 Dual port 32Gb Fibre Channel-to-12Gb SAS/SATA storage controller. Both an ATTO XstreamCORE FC 7500 and ATTO XstreamCORE FC 7600 will be on hand at Insight Barcelona.

ATTO is a member of the NetApp Alliance Partner Program, and the MetroCluster is the foundation upon which the ATTO and NetApp relationship is built. NetApp MetroCluster configurations allow site-to-site connectivity up to 300 kilometers apart with redundant low-latency links. ATTO storage controllers provide the ability to load balance between data centers in addition to failover and failback functionality. ATTO storage controllers enable the integration of multiple shelves of flash storage for MetroCluster installations with a resilient back-end storage architecture.

The ATTO XstreamCORE FC 7500 storage controller integrates SAS/SATA disk storage into a Fibre Channel SAN, increasing availability and scalability while allowing the use of NetApp FAS series storage on a shared Fibre Channel network. A solid-state, high-performance platform accelerates all reads and writes in hardware and adds Enterprise-level 16Gb Fibre Channel SAN connectivity along with diagnostic, management and monitoring integration with NetApp Data ONTAP®.

Delivering 1.47M 4K IOPS in dual-controller configurations with less than four microseconds of latency, the FC 7500 provides unmatched dollars per IOPS value and the lowest access latency in the industry. The ATTO XstreamCORE FC 7600 doubles these capabilities.

ATTO enhances NetApp ecosystems beyond MetroCluster with a full range of storage and network connectivity products. These include ATTO ThunderLink® Thunderbolt™ adapters for Fibre Channel and Ethernet, ATTO FastFrame NICs, examples of which are at the show, and ATTO ExpressSAS RAID HBAs. We rigorously test our products for interoperability with NetApp solutions and most are certified compatible directly by NetApp.

Complete details on what we have in Barcelona and how ATTO unleashes the power of NetApp can be found at our website on out NetApp Insight page.

Read more about ATTO at our Article Archive
Top