ATTO Software Downloads

The following are current versions of ATTO drivers and software. If a driver or software package does not appear on this list, it may still be available by contacting ATTO Tech Support.

The current sort appears below. SEARCH the sorted file listing using the search box (when each sort filter is set to “all”, all files are searched).

ATTO Product:
All

Product Family:
All

Operating System:
All

Title
XstreamCORE 8200T Windows QuickNAV Software

FileAction
Driver - QuickNAV v3.90 — Updated on 2020-01-28
Product Release Notes - QuickNAV v3.90
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 8200T Linux QuickNAV Software

FileAction
Driver - QuickNAV v3.90
Product Release Notes - QuickNAV v3.90
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 8200T Firmware

FileAction
PRN_XstreamCORE_8200T_v6.00.pdf
ATTO will provide the necessary files and instructions to properly complete the process for updating firmware for the XstreamCORE to v6.00 from all earlier versions. Please contact ATTO Customer Support at +1 (716) 691-1999, or via our website at https://oem.atto.com/about/contact-atto/ to begin the update process for your XstreamCORE intelligent bridge.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 8200 Windows QuickNAV Software

FileAction
Driver - QuickNAV v3.90 — Updated on 2020-03-03
Product Release Notes - QuickNAV v3.90 — 3.90 — Updated on 2020-01-28
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 8200 Linux QuickNAV Software

FileAction
QuickNAV_3_90_F1.tar
PRN_QuickNAV_v390Rev03_03_2020.pdf
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 8200 Firmware

FileAction
Product Release Notes - XstreamCORE 8200 v6.00 — Updated on 2024-03-29
ATTO will provide the necessary files and instructions to properly complete the process for updating firmware for the XstreamCORE to v6.00 from all earlier versions. Please contact ATTO Customer Support at +1 (716) 691-1999, or via our website at https://oem.atto.com/about/contact-atto/ to begin the update process for your XstreamCORE intelligent bridge.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 8100T Software

FileAction
Driver — 2.01 — Updated on 2024-06-13
Product Release Notes — Updated on 2024-06-04
Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7600 Windows Driver

FileAction
PRN_XstreamCORE_FC_7600_v400.pdf
ATTOBridgeDriver_0913.zip — v2013.09.06
Updating firmware for the XstreamCORE from v3.70, or earlier, to any later version requires secure files for each bridge being updated. ATTO will provide these files, as well as clear instructions on the update process. Please contact ATTO Customer Support at +1 (716) 691-1999 or via our web site at https://www.atto.com/about/contact-atto/ to begin the update process.

We do offer a download package for QuickNAV, which is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7600 macOS QuickNAV Software

FileAction
Driver - QuickNAV v3.60 — Updated on 2015-10-15
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7600 Linux QuickNAV Software

FileAction
Driver - QuickNAV v3.90
Product Release Notes - QuickNAV v3.90
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7550 Windows Software

FileAction
PRN_XstreamCORE_FC_7550_v400.pdf
ATTOBridgeDriver_0913.zip
Updating firmware for the XstreamCORE from v3.70, or earlier, to any later version requires secure files for each bridge being updated. ATTO will provide these files, as well as clear instructions on the update process. Please contact ATTO Customer Support at +1 (716) 691-1999 or via our web site at https://www.atto.com/about/contact-atto/ to begin the update process.

We do offer a download package for QuickNAV, which is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7550 macOS QuickNAV Software

FileAction
QuickNAV-MAC3.6.dmg — 3.60
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7550 Linux Firmware

FileAction
QuickNAV — 3.90
Updating firmware for the XstreamCORE from v3.70, or earlier, to any later version requires secure files for each bridge being updated. ATTO will provide these files, as well as clear instructions on the update process. Please contact ATTO Customer Support at +1 (716) 691-1999 or via our web site at https://www.atto.com/about/contact-atto/ to begin the update process.

We do offer a download package for QuickNAV, which is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.

Product Release Notes - 7550 v4.00

Product Release Notes - QuickNAV v3.90
ATTO ConfigTool Windows

FileAction
win_app_configtool_441.exe — Updated on 2024-06-07
The ATTO ConfigTool offers remote management features that allow you to set up, optimize and manage both locally and remotely connected ATTO products. Refer to the Utilities Manual tor details. Download the tool to your PC and double click the file to launch the installer.

View the ConfigTool Product Release Notes.
ATTO ConfigTool macOS

FileAction
osx_app_configtool_441.dmg — Updated on 2024-06-07
The ATTO ConfigTool offers remote management features that allow you to set up, optimize and manage both locally and remotely connected ATTO products. Refer to the Utilities Manual for details. Download the tool to your Mac and double click the tile to launch the installer.

View the ConfigTool Product Release Notes.

Note: When installing an ATTO driver on macOS, you may get a pop-up message warning: "this is a system extension that will be incompatible with a future version of macOS.

There is no need to be concerned. ATTO currently uses high-performance Kernel Extension Drivers or kexts (also known as System Extensions). At some point Apple intends to deprecate support for kext and only support dext drivers. At that time ATTO will update all drivers to dext. All current ATTO host adapters and Thunderbolt devices will natively support the new dext drivers. In the meantime, we will continue to provide the highest-performing drivers possible.
ATTO ConfigTool Linux

FileAction
lnx_app_configtool_441.tgz — Updated on 2024-06-07
The ATTO ConfigTool offers remote management features that allow you to set up, optimize and manage both locally and remotely connected ATTO products. Refer to the Utilities Manual tor details. Download the tool to your PC and double click the file to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.

View the ConfigTool Product Release Notes.