ATTO Software Downloads

The following are current versions of ATTO drivers and software. If a driver or software package does not appear on this list, it may still be available by contacting ATTO Tech Support.

The current sort appears below. SEARCH the sorted file listing using the search box (when each sort filter is set to “all”, all files are searched).

ATTO Product:
All

Product Family:
All

Operating System:
Linux

Title
XstreamCORE 8200T Linux QuickNAV Software

FileAction
Driver - QuickNAV v3.90
Product Release Notes - QuickNAV v3.90
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 8200 Linux QuickNAV Software

FileAction
QuickNAV_3_90_F1.tar
PRN_QuickNAV_v390Rev03_03_2020.pdf
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7600 Linux QuickNAV Software

FileAction
Driver - QuickNAV v3.90
Product Release Notes - QuickNAV v3.90
QuickNAV is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
XstreamCORE 7550 Linux Firmware

FileAction
QuickNAV — 3.90
Updating firmware for the XstreamCORE from v3.70, or earlier, to any later version requires secure files for each bridge being updated. ATTO will provide these files, as well as clear instructions on the update process. Please contact ATTO Customer Support at +1 (716) 691-1999 or via our web site at https://www.atto.com/about/contact-atto/ to begin the update process.

We do offer a download package for QuickNAV, which is a utility that can be used to identify your appliance on a network. In order to configure an ATTO appliance using the built-in XstreamVIEW configuration utility, you must first identify the IP address to be used for management of the appliance. QuickNAV can help. Download the QuickNAV utility to your computer. Double click to uncompress it. Then double click to launch the installer.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.

Product Release Notes - 7550 v4.00

Product Release Notes - QuickNAV v3.90
ThunderLink NS 3252, N3 3102, N3 3102T Linux Drivers

FileAction
lnx_fls_fastframe3_31 — 31.1014 — Updated on 2023-12-12
PRN_10254050100Gb_BIOS_v3311014_Rev12_12_2023 — 31.1014 — Updated on 2023-12-12
Linux flash bundle for Ethernet adapters. Download this file to your PC and use the latest version of the ATTO ConfigTool to install the flash bundle on your PC.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
FastFrame 4 10/25/40/50/100GbE SmartNIC Flash Bundle Linux

FileAction
lnx_fls_fastframe4_229.1.123.0.tgz — Updated on 2024-04-24
PRN_4thGeneration10254050100Gb_BIOS_v229.1.123.0_Rev04_25_2024.pdf — Updated on 2024-04-24
FastFrame firmware Linux flash updates for FastFrame 4 10/25/40/50/100GbE SmartNICs.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
FastFrame 3 10/25/40/50/100GbE SmartNIC Flash Bundle Linux

FileAction
Flash Bundle - Linux v35.3006 — Updated on 2024-03-14
Product Release Notes - Linux v35.3006 — Updated on 2024-03-14
NOTE: For use with N311, N312, N351, N352, and N322

FastFrame firmwareLinuxflash updates for FastFrame 3 10/25/40/50/100GbE SmartNICs.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
FastFrame 1 10GbE NIC Driver Linux

FileAction
ixgbe-5.18.6.tgz — Updated on 2023-01-03
Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ExpressSAS 6Gb Flash Bundle Linux

FileAction
lnx_fls_esashba2_221213.tgz
ExpressSAS 6Gb firmware flash updates for Linux. Download this file to your PC and unzip it.
ExpressSAS 6Gb Driver Linux

FileAction
lnx_drv_esashba2_2410f1.tgz
PRN_ESASHBA2_6Gb_Linux_v241_Rev01_30_2023.pdf — 2.4.1 — Updated on 2023-01-30
Linux driver for 6Gb SAS/SATA adapters. Download this file to your PC and unzip it. Instructions to install the drivers can be found in the readme files included in the download package. The ATTO CLI Tool is also included and can be used by advanced users to perform additional capabilities and various functions within the adapters. It can be used locally via a terminal application and uses ASCII commands typed while in CLI mode.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ExpressSAS 24Gb SAS/SATA Flash Bundle Linux

FileAction
lnx_fls_esashba6_240507.tgz — 240507 — Updated on 2024-06-07
PRN_24Gb_BIOS_v240507_Rev05_15_2024.pdf
ExpressSAS firmware Linux flash update for 24Gb GT SAS/SATA adapters. Download this file to your PC and unzip it.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ExpressSAS 24Gb Driver Linux

FileAction
lnx_drv_esashba6_1000f1.tgz — 1.00 — Updated on 2024-06-07
PRN_24Gb_Linux_v1.00_Rev05_15_2024.pdf
Linux driver for 24Gb GT SAS/SATA adapters. Download this file to your PC and unzip it. Instructions to install the drivers can be found in the readme files included in the download package. The ATTO CLI Tool is also included and can be used by advanced users to perform additional capabilities and various functions within the adapters. It can be used locally via a terminal application and uses ASCII commands typed while in CLI mode.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ExpressSAS 12Gb GT SAS/SATA Flash Bundle Linux

FileAction
lnx_fls_esashba5_240529.tgz — 240529 — Updated on 2024-06-06
ExpressSAS 12Gb GT SAS/SATA Flash Bundle Linux PRN — Updated on 2024-06-06
Linux flash bundle for ExpressSAS 12Gb GT adapters.

Instructions on how to flash can be found in the ReadMe downloaded with the flash bundle file.

Supported Products: ExpressSAS H1280GT, ExpressSAS H1208GT, ExpressSAS, H1244GT, ExpressSAS H12F0GT & ExpressSAS H120FGT.
ExpressSAS 12Gb GT SAS/SATA Driver Linux

FileAction
lnx_drv_esashba5_1080f1.tgz — 1.08 — Updated on 2024-06-06
ExpressSAS 12Gb GT SAS/SATA Driver Linux PRN — Updated on 2024-06-06
Proprietary Linux device driver for ExpressSAS 12Gb GT Host Bus Adapters.

Supports the following Linux Distributions: Red Hat Enterprise Linux 8 & 9, Rocky Linux 8 & 9, openSUSE Leap 15, SUSE Linux Enterprise Server 15, Ubuntu 22.04 LTS & 24.04 LTS.
ExpressSAS 12Gb (legacy, non-GT) Flash Bundle Linux

FileAction
Flash Bundle - Linux — 221213 — Updated on 2022-12-13
ExpressSAS firmware Linux flash updates for 12Gb (legacy, non-GT) SAS/SATA adapters. Download this file to your PC and unzip it.
ExpressSAS 12Gb (legacy, non-GT) Driver Linux

FileAction
Driver - Linux — 1.54 — Updated on 2024-06-07
PRN - Linux — Updated on 2024-06-07
Linux driver for 12Gb (legacy, non-GT) SAS/SATA adapters. Download this file to your PC and unzip it. Instructions to install the drivers can be found in the readme files included in the download package. The ATTO CLI Tool is also included and can be used by advanced users to perform additional capabilities and various functions within the adapters. It can be used locally via a terminal application and uses ASCII commands typed while in CLI mode.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ExpressNVM Flash Bundle Linux

FileAction
lnx_fls_envmsc1_231004.tgz — 231004 — Updated on 2023-10-04
ExpressNVM Flash Bundle Linux PRN — Updated on 2023-10-04
Linux flash bundle for ExpressNVM S4FF & S48F Switch Adapters.

Instructions on how to flash can be found in the ReadMe downloaded with the flash bundle file.

Supported Products: ENVM-S48F and ENVM-S4FF.
ExpressNVM Driver Linux

FileAction
lnx_drv_envmsc1_1021f1.tgz — 1.02.1 — Updated on 2023-12-01
ExpressNVM Driver Linux PRN — Updated on 2023-12-01
Proprietary Linux device driver for ExpressNVM S4FF & S48F Switch Adapters.

Supports the following Linux Distributions: Red Hat Enterprise Linux 8 & 9, Rocky Linux 8 & 9, SUSE Linux Enterprise Server 15, Ubuntu 20.04 LTS & 22.04 LTS.
Celerity 8Gb Fibre Channel MultiPath Director Driver Linux

FileAction
lnx_drv_celerity8_2270f1-mp.tgz — 2.27 MP — Updated on 2024-07-09
8Gb Celerity Linux MultiPath Director PRN — 2.27 MP — Updated on 2024-07-09
ATTO MultiPath Director is a proprietary driver that enables Linux hosts to connect to storage systems that support ALUA for failover, failback and load balancing across Fibre Channel ports.

Supports the following Linux Distributions: Red Hat Enterprise Linux 8 & 9, Rocky Linux 8 & 9, openSUSE Leap 15, SUSE Linux Enterprise Server 15, Ubuntu 22.04 LTS & 24.04 LTS.
Celerity 8Gb Fibre Channel Flash Bundle Linux

FileAction
lnx_fls_celerity8_180406.tgz — 180406 — Updated on 2018-04-06
Celerity 8Gb Fibre Channel Flash Bundle PRN — Updated on 2018-04-06
Linux flash bundle for Celerity 8Gb Fibre Channel adapters.

Instructions on how to flash can be found in the ReadMe downloaded with the flash bundle file.

Supported Products: Celerity FC-81EN, Celerity FC-82EN and Celerity FC-84EN.

 
Celerity 8Gb Fibre Channel Driver Linux

FileAction
lnx_drv_celerity8_2270f1.tgz — 2.27 — Updated on 2024-07-09
8Gb Celerity Linux Product Release Notes — Updated on 2024-07-09
Proprietary Linux device driver for 8Gb Celerity Fibre Channel Host Bus Adapters.

Supports the following Linux Distributions: Red Hat Enterprise Linux 8 & 9, Rocky Linux 8 & 9, openSUSE Leap 15, SUSE Linux Enterprise Server 15, Ubuntu 22.04 LTS & 24.04 LTS.
Celerity 16/32/64Gb Fibre Channel MultiPath Director Driver Linux

FileAction
lnx_drv_celerity16-64_2100f1-mp.tgz — 2.10 — Updated on 2024-07-09
Celerity 16/32/64Gb MultiPath Director Driver Linux PRN — Updated on 2024-07-09
ATTO MultiPath Director is a proprietary driver that enables Linux hosts to connect to storage systems that support ALUA for failover, failback and load balancing across Fibre Channel ports.

Supports the following Linux Distributions: Red Hat Enterprise Linux 8 & 9, Rocky Linux 8 & 9, openSUSE Leap 15, SUSE Linux Enterprise Server 15, Ubuntu 22.04 LTS & 24.04 LTS.
Celerity 16/32/64Gb Fibre Channel Flash Bundle Linux

FileAction
lnx_fls_celerity16-64_240118.tgz — 240118 — Updated on 2024-01-18
Celerity 16/32/64Gb Fibre Channel Flash Bundle Linux PRN — Updated on 2024-01-18
Linux flash bundle for Celerity 16/32/64Gb Fibre Channel adapters.

Instructions on how to flash can be found in the ReadMe downloaded with the flash bundle file.

Supported Products: Celerity FC-161P, Celerity FC- 162P, Celerity FC-164P, Celerity FC-321E, Celerity FC-321E, Celerity FC-324E, Celerity FC-321P, Celerity FC- 322P, Celerity FC-324P, Celerity FC-641E and Celerity FC- 642E.
Celerity 16/32/64Gb Fibre Channel Driver Linux

FileAction
lnx_drv_celerity16-64_2100f1.tgz — 2.10 — Updated on 2024-07-09
Celerity 16/32/64Gb Fibre Channel Driver Linux PRN — Updated on 2024-07-09
Proprietary Linux device driver for 16/32/64Gb Celerity Fibre Channel Host Bus Adapters.

Supports the following Linux Distributions: Red Hat Enterprise Linux 8 & 9, Rocky Linux 8 & 9, openSUSE Leap 15, SUSE Linux Enterprise Server 15, Ubuntu 22.04 LTS & 24.04 LTS.
ATTO Ethernet Suite Linux Ubuntu 22.04

FileAction
Ethernet Suite - Ubuntu 22.04 v5.04 — Updated on 2024-04-01
Product Release Notes - Linux Ethernet Suite v5.04 — Updated on 2024-04-01
NOTE: For use with N311, N312, N351, N352, and N322

ATTO Ethernet Suite is a custom installer that loads the relevant Linux driver and ATTO 360 utility.  ATTO 360 software is an all-purpose tool for Ethernet network optimization featuring performance tuning, monitoring, and diagnostic tools that deliver the best performing and most efficient storage networks.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ATTO Ethernet Suite Linux RHEL 9.3

FileAction
Ethernet Suite - RHEL 9.3 v5.04 — Updated on 2024-04-01
Product Release Notes - Linux Ethernet Suite v5.04 — Updated on 2024-04-01
NOTE: For use with N311, N312, N351, N352, and N322

ATTO Ethernet Suite is a custom installer that loads the relevant Linux driver and ATTO 360 utility.  ATTO 360 software is an all-purpose tool for Ethernet network optimization featuring performance tuning, monitoring, and diagnostic tools that deliver the best performing and most efficient storage networks.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ATTO Ethernet Suite Linux RHEL 8.9

FileAction
Ethernet Suite - RHEL 8.9 v5.04 — Updated on 2024-04-01
Product Release Notes - Linux Ethernet Suite v5.04 — Updated on 2024-04-01
NOTE: For use with N311, N312, N351, N352, and N322

ATTO Ethernet Suite is a custom installer that loads the relevant Linux driver and ATTO 360 utility.  ATTO 360 software is an all-purpose tool for Ethernet network optimization featuring performance tuning, monitoring, and diagnostic tools that deliver the best performing and most efficient storage networks.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ATTO Ethernet Suite Linux RHEL 8.5

FileAction
Ethernet Suite - RHEL 8.5 v5.04 — Updated on 2024-04-01
Product Release Notes - Linux Ethernet Suite v5.04 — Updated on 2024-04-01
NOTE: For use with N311, N312, N351, N352, and N322

ATTO Ethernet Suite is a custom installer that loads the relevant Linux driver and ATTO 360 utility.  ATTO 360 software is an all-purpose tool for Ethernet network optimization featuring performance tuning, monitoring, and diagnostic tools that deliver the best performing and most efficient storage networks.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ATTO Ethernet Suite Linux RHEL 7.9

FileAction
Ethernet Suite - RHEL 7.9 v5.04 — Updated on 2024-04-01
Product Release Notes - Linux Ethernet Suite v5.04 — Updated on 2024-04-01
NOTE: For use with N311, N312, N351, N352, and N322

ATTO Ethernet Suite is a custom installer that loads the relevant Linux driver and ATTO 360 utility.  ATTO 360 software is an all-purpose tool for Ethernet network optimization featuring performance tuning, monitoring, and diagnostic tools that deliver the best performing and most efficient storage networks.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ATTO Ethernet Suite Linux RHEL 7.6

FileAction
Ethernet Suite - RHEL 7.6 v5.04 — Updated on 2024-04-01
Product Release Notes - Linux Ethernet Suite v5.04 — Updated on 2024-04-01
NOTE: For use with N311, N312, N351, N352, and N322

ATTO Ethernet Suite is a custom installer that loads the relevant Linux driver and ATTO 360 utility.  ATTO 360 software is an all-purpose tool for Ethernet network optimization featuring performance tuning, monitoring, and diagnostic tools that deliver the best performing and most efficient storage networks.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.
ATTO ConfigTool LiveISO

FileAction
lnx_app_configtoollive_240509.tgz
The ATTO ConfigTool LiveISO is a bootable system image used to update flash bundles and access diagnostic utilities when using open-source ATTO drivers, alongside more robust adapter management and monitoring tools. A full description is available in the Utilities Manual.

Please refer to the Product Release Notes for more detailed information on operating system support as well as specific information about release contents.

View the ConfigTool LiveISO Product Release Notes.
ATTO ConfigTool Linux

FileAction
lnx_app_configtool_441.tgz — Updated on 2024-06-07
The ATTO ConfigTool offers a graphical user interface to easily monitor and manage ATTO host bus adapter settings for specialized applications. It can be used to view the drivers and flash files currently in use, easily update the firmware, collect diagnostic logs and configure adapter settings.

ATTO ConfigTool requires a supported ATTO Product. The HBA drivers and firmware are not included with the utility.